Dell C9000 Series Reference Manual page 987

linecard slot-
number
Defaults none
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.1.1.0
7.6.1.0
7.5.1.0
7.5.1.0
Usage Information To view the show output for multiple ports of a specified slot at a time, you can specify
any random port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port range
values separated with commas; for example, show interfaces status FortyGigE
1/0-4,7,9-11. To enter any random number of ports, you can enter a comma-
separated string of port numbers, for example show interfaces status
FortyGigE 1/0/1,9,11
Dell#sho interfaces status | no-more
Port
Fo 0/0
Fo 0/4
Fo 0/8
Fo 0/12
Fo 0/16
Fo 0/20
(OPTIONAL) Enter the keyword linecard then the slot number.
The slot ID is from 0 to 11.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
NOTE: The port-range option is only available for 1 Gigabit Ethernet, 10-Gigabit
Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port Channel, and VLAN
interfaces.
Description Status Speed Duplex Vlan
Down 40000 Mbit Auto
Down 40000 Mbit Auto
Down 40000 Mbit Auto
Down 40000 Mbit Auto
Down 40000 Mbit Auto
Down 40000 Mbit Auto
--
--
--
--
--
--
Interfaces 987