Show Ip Route List - Dell C9000 Series Reference Manual

default
Gateway of last resort is not set
----------- ------- ----------- -----------
R
> R 100.10.10.0/24
C
> R 101.10.10.0/24
Dell#
Example
Dell#show ip route summary
(Summary)
Route Source
connected
static
Total
Total 3 active route(s) using 612 bytes
Dell#show ip route static
Destination
-----------
*S

show ip route list

Display IP routes in an IP prefix list.
C9000 Series
Syntax
show ip route list prefix-list
Parameters
prefix-list
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate
>- non-active route + - summary route
Destination
3.0.0.0/8
100.10.10.0/24
101.10.10.0/24
Active Routes
2
1
3
Gateway
-------
0.0.0.0/0 via 10.10.91.9, Te 1/2
Enter the name of a configured prefix list.
• EXEC
• EXEC Privilege
Gateway
via 100.10.10.10, So 2/8 120/1
via 101.10.10.10, So 2/9
Direct, Te 2/8
Direct, Te 2/8
Direct, Te 2/9
Direct, Te 2/9
Non-active Routes
0
0
0
Dist/Metric Last Change
00:07:12
0/0 00:08:54
120/0 00:08:54
0/0 00:09:15
120/0 00:09:15
Dist/Metric Last Change
----------- -----------
1/0 3d2h
IPv4 Routing 1229