Ipv6 Ospf Authentication - Dell C9000 Series Reference Manual

Parameters
process-id
area area-id
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.4.1.0

ipv6 ospf authentication

Configure an IPsec authentication policy for OSPFv3 packets on an IPv6 interface.
C9000 Series
Syntax
ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1}
[key-encryption-type] key}}
Parameters
null
ipsec spi number
MD5 | SHA1
key-encryption-
type
key
Enter the process identification number.
Specify the OSPF area. The range is from 0 to 65535.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Introduced on the E-Series and C-Series.
Causes an authentication policy configured for the area to not
be inherited on the interface.
Security Policy index (SPI) value that identifies an IPsec security
policy. The range is from 256 to 4294967295.
Authentication type: Message Digest 5 (MD5) or Secure Hash
Algorithm 1 (SHA-1).
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in authentication.
Open Shortest Path First (OSPFv2 and OSPFv3) 1582