Defaults
1800 seconds
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Related
mac learning-limit
Commands
show mac-address-table aging-time
mac-address-table disable-learning
Disable MAC address learning from LACP or LLDP BPDUs.
Syntax
mac-address-table disable-learning [lacp | lldp]
Parameters
lacp
lldp
MAC address table, enter 0. The range is from 10 to 1000000.
The default is 1800 seconds.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
On the E-Series, available in INTERFACE VLAN context, reduced
the minimum aging time in the INTERFACE VLAN context from
10 seconds to 1 second.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the MAC address learning limits for a selected interface.
— displays the MAC aging time.
Enter lacp to disable MAC address learning from LACP BPDUs.
Enter LLDP to disable MAC address learning from LLDP BPDUs.
Layer 2
1310