Dell C9000 Series Reference Manual page 920
Networking command-line reference guide
Hide thumbs
Also See for C9000 Series:
- Configuration manual (9 pages) ,
- Networking configuration manual (1251 pages)
Table of Contents
Advertisement
vrrp [[ipv6] vrid]
learning-limit
vlan vlan-id
Defaults
Without an interface specified, the command clears all interface counters.
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.1)
9.7(0.0)
•
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
•
For MAC access-group counters, enter the keyword mac.
•
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port (ports, port-range)
information.
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 4096.
•
For the management interface on the RPM, enter the
keyword ManagementEthernet then slot/port
information. The slot range is from 0 to 1 and the port
range is 0.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port (ports, port-
range) information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port (range of ports) information.
•
For a tunnel interface, enter the keyword tunnel. The
range is from 1 to 16383.
•
For a port extender Gigabit Ethernet interface, enter the
keyword peGigE then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
(OPTIONAL) Enter the keyword vrrp to clear the counters of all
VRRP groups. To clear the counters of VRRP groups on all IPv6
interfaces, enter ipv6. To clear the counters of a specified
group, enter a VRID number from 1 to 255.
(OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC learning
limit is configured on the interface.
Enter the keyword vlan then the interface VLAN number. The
range is from 1 to 4094.
Description
Introduced on the C9010.
Introduced on the S3048-ON.
Introduced on the S4048-ON.
Introduced on the S6000-ON.
Interfaces
920
Advertisement
Chapters
Table of Contents
