Dell C9000 Series Reference Manual page 796

port set port-pipe
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Example
Dell# show hardware system-flow pe 1 stack-unit 0 port-set
######### FP Entry for IPC traffic destined to stack_unit 4 PE
CPU#######
EID 0x000003fb: gid=0xd,
prio=0x3fb,flags=0x10602,Installed, Enabled
Stage
InPorts
DATA=0x0000000000000000000000000000000000000000000000c000000000000
MASK=0x0000000000000000000000000000000000000000000000dffffffffffff
HiGig
DstIp
OuterVlanId
param3=0(0)}
param2=0(0), param3=0(0)}
######### FP Entry for IPC traffic destined to stack_unit 5 PE
CPU#######
EID 0x000003fa: gid=0xd,
Enter the keyword port-set and port-pipe number. The port-
set number is 0.
Description
Introduced on the C9010.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
slice=11, slice_idx=0x5, part =0
tcam: color_indep=1024,
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
Offset: 105 Width: 32
DATA=0x7f080141
MASK=0xffffffff
Offset: 8 Width: 12
DATA=0x00000ffc
MASK=0x00000fff
action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0),
action={act=RedirectPort, param0=4(0x4), param1=0(0),
policer=
statistics={stat id 58 slice = 0 idx=15 entries=1}{Packets}
Debugging and Diagnostics
0
796