clear frrp
Clear the FRRP statistics counters.
C9000 Series
Syntax
clear frrp [ring-id]
Parameters
ring-id
Defaults
none
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
Usage Information Executing this command without the optional ring-id command clears the statistics
counters on all the available rings. The system requires a command line confirmation
before the command executes. This command clears the following counters:
Example
Dell# clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
(Optional) Enter the ring identification number. The range is
from 1 to 255.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
•
hello Rx and Tx counters
•
Topology change Rx and Tx counters
•
The number of state change counters
Force10 OS Resilient Ring Protocol (FRRP)
884