Debug Lldp Interface - Dell C9000 Series Reference Manual

Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.7.1.0
7.6.1.0
7.4.1.0

debug lldp interface

To display timer events, neighbor additions or deletions, and other information about incoming and outgoing
packets, enable LLDP debugging.
C9000 Series
Syntax
debug lldp interface {interface | all}{events | packet {brief |
detail} {tx | rx | both}}
To disable debugging, use the no debug lldp interface {interface | all}
{events} {packet {brief | detail} {tx | rx | both}} command.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Management Ethernet interface, enter the keyword
managementethernet then the slot/port information.
• For a port extender (PE) Gigabit Ethernet interface, enter
the keyword peGigE then the pe-id / stack-unit / port-id
information.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Link Layer Discovery Protocol (LLDP) 1366