Service-Policy Output - Dell C9000 Series Reference Manual

service-policy output

Apply an output policy map to the selected interface.
C9000 Series
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy
output policy-map-name command.
Parameters
policy-map-name
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
6.1.1.1
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-
policy for those interfaces. A policy map attached to an interface can be modified.
Related
policy-map-output
Commands
Enter the name for the policy map in character format (32
characters maximum). You can identify an existing policy map or
name one that does not yet exist.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
— creates an output policy map.
Quality of Service (QoS) 1824