Policy-Aggregate - Dell C9000 Series Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Usage Information To access this command, enter the class-map command. You can match against only
one VLAN ID.
Related class-map
Commands

policy-aggregate

Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of
the policy map (input/output) applied on an interface.
C9000 Series
Syntax
policy-aggregate qos-policy-name
To remove a policy aggregate configuration, use the no policy-aggregate qos-
policy-name command.
Parameters
qos-policy-name
Defaults none
Command Modes CONFIGURATION (policy-map-input and policy-map-output)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
— identifies the class map.
Enter the name of the policy map in character format (32
characters maximum).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Policy name character limit increased from 16 to 32.
Quality of Service (QoS) 1812