Advertise Med Video-Signaling - Dell C9000 Series Reference Manual

advertise med video-signaling

To advertise video control packets that use a separate network policy than video data, configure the system.
C9000 Series
Syntax
advertise med video-signaling {vlan-id layer2_priority DSCP_value}
| {priority-tagged number}
To return to the default, use the no advertise med video-signaling {vlan-id
layer2_priority DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id
layer2_priority
DSCP_value
priority-tagged
number
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
Related
debug lldp interface
Commands
show lldp neighbors
Enter the VLAN ID. The range is from 1 to 4094.
Enter the Layer 2 priority (C-Series and E-Series only). The range
is from 0 to 7.
Enter the DSCP value (C-Series and E-Series only). The range is
from 0 to 63.
Enter the keywords priority-tagged then the Layer 2 priority.
The range is from 0 to 7.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
— debugs LLDP.
— displays the LLDP neighbors.
Link Layer Discovery Protocol (LLDP) 1389