Clear Ipv6 Fib - Dell C9000 Series Reference Manual

clear ipv6 fib

Clear (refresh) all forwarding information base (FIB) entries on a line card.
C9000 Series
Syntax
clear ipv6 fib {linecard slot-id } vrf vrf-name
Parameters
vrf vrf–name
linecard slot
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.1)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.2.1.0
7.8.1.0
7.4.1.0
(Optional) Enter the keyword vrf followed by the name of the
VRF to clear the neighbor corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are cleared.
Enter the slot number to clear the FIB for a linecard. Range is 0
to 11.
Description
Introduced on the C9010.
Introduced on the S3048-ON.
Introduced on the S4048-ON.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
IPv6 Basics 1268