Power Budget Global-Threshold - Dell C9000 Series Reference Manual

Usage Information The on-disable transmit shutdown command allows transmission of LLDP
shutdown frames when the LLDP protocol is disabled in the interface mode.
Example
Dell#sh running-config interface tengigabitethernet 0/1
!
interface TenGigabitEthernet 10/1
no ip address
switchport
switchport mode private-vlan host
!
protocol lldp
on-disable
no shutdown
Related
show running-config lldp
Commands

power budget global-threshold

Set a global threshold limit for the PoE power budget on a specified port extender.
C9000 Series
Syntax
power budget global-threshold pe pe-id stack-unit unit number
threshold-value
Parameters
pe pe-id
stack-unit unit
number
threshold-value
Default None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
transmit shutdown
— displays the LLDP running configuration.
Enter the keyword pe and port extender ID. Range is from 0 to
255.
Enter the keyword stack-unit and unit number. Range is from
0 to 7.
Enter the power threshold limit value in percentage. Range is
from 10 to 99%. Default value is 99%.
Port Extenders (PE) 1751