Feature Extended-Bridge - Dell C9000 Series Reference Manual

Example
Dell#connect pe 254
Login: peadmin
Password:
DellPE>

feature extended-bridge

Enable 802.1BR (bridge port extender) support on the switch.
C9000 Series
Syntax
[no] feature extended-bridge
To disable 802.1BR support on the switch, use the no feature extended-bridge
command.
Default None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
Usage Information This command enables support for the 802.1 bridge PE (BR) on the switch. Enabling the
PE feature allows you to provision the PE. The no feature extended-bridge
command disables bridge PE support and deprovisions a PE. When you use this
command in the Configuration Terminal Batch mode, you can enable the support for
the bridge PE connected in a Dual-Homing setup.
You can use the show feature command to check whether the extended-bridge
feature has been enabled as shown in the following example.
Example
Dell>show feature
Feature
-------
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
State
-----
Port Extenders (PE) 1716