Ipv6 Name-Server - Dell C9000 Series Reference Manual

ipv6 name-server

Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order of
their use.
C9000 Series
Syntax
ipv6 name-server ipv6-address [ipv6-address2... ipv6-address6]
To remove a name server, use the no ipv6 name—server ipv6–address
command.
Parameters
ipv6-address
ipv6-address2...
ipv6-address6
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.4.2.1
8.4.1.0
Usage Information You can separately configure both IPv4 and IPv6 domain name servers.
Enter the IPv6 address (X:X:X:X::X) of the name server to be
used.
Note: The :: notation specifics successive hexadecimal fields of
zeros.
(OPTIONAL) Enter up to five more IPv6 addresses, in the
x:x:x:x::x format, of name servers to be used. Separate the IPv6
addresses with a space.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
IPv6 Basics 1276