Ip Igmp Group-Join-Limit; Ip Igmp Immediate-Leave - Dell C9000 Series Reference Manual

ip igmp group-join-limit

Set a limit to the number of IGMP groups that can be joined in a second,
C9000 Series
Syntax
ip igmp group-join-limit number
Parameters
number
Defaults none
Command Modes CONFIGURATION (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.2(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0

ip igmp immediate-leave

Enable IGMP immediate leave.
C9000 Series
Syntax
ip igmp immediate-leave [group-list prefix-list-name]
Enter the number of IGMP groups permitted to join in a second.
The range is from 1 to 10000.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Internet Group Management Protocol (IGMP) 1128