Distance - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

distance

Define the administrative distance for learned routes.

C9000 Series

distance weight [ip-address mask [prefix-list]]

To return to the default values, use the no distance weight command.

ip-address mask

weight = 115

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the S4810.

Introduced on the Z9000.

— Enter ROUTER mode on the switch.

The administrative distance value indicates the reliability of a

routing information source. The range is from 1 to 255. (A higher

relative value indicates lower reliability. Routes with smaller

values are given preference.) The default is 115.

(OPTIONAL) Enter next-hop IP address in dotted decimal format

and enter a mask in either dotted decimal or /prefix format.

(OPTIONAL) Enter the name of a prefix list name.

ROUTER ISIS (for IPv4)

CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Introduced on the C9010.

Introduced on the Z9500.

Intermediate System to Intermediate System (IS-IS)

Table of Contents