Debug Ip Bgp Ipv6 Unicast Updates - Dell C9000 Series Reference Manual

To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
dampening
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.2(1.0)
7.4.1.0

debug ip bgp ipv6 unicast updates

View information about BGP updates.
C9000 Series
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in |
out]
To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-address
prefix-length updates [in | out] command.
Parameters
ipv6-address
prefix-length
updates
in
out
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
Enter the keyword dampening to clear route flap dampening
information.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the keyword updates to view BGP update information.
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
(OPTIONAL) Enter the keyword out to view only BGP updates
sent to neighbors.
Description
Introduced on the C9010.
Border Gateway Protocol 590