Verify - Dell C9000 Series Reference Manual

verify

Validate the software image on the flash drive after the image has been transferred to the system, but before
the image has been installed.
C9000 Series
Syntax verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters
md5
sha256
flash://
img-file
hash-value
Default flash drive
Command Modes EXEC mode
Command History
Version
9.9(0.0)
9.5(0.1)
9.5(0.0)
Usage Information You can enter this command in the following ways:
Enter the md5 keyword to use the MD5 message-digest
algorithm.
Enter the sha256 keyword to use the SHA256 Secure Hash
Algorithm
(Optional). Enter the flash:// keyword. The default is to use
the flash drive. You can just enter the image file name.
Enter the name the Dell Networking software image file to
validate.
(Optional). Enter the relevant hash published on i-Support.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
• verify md5 flash://img-file
• verify md5 flash://img-file <hash-value>
• verify sha256 flash://img-file
• verify sha256 flash://img-file <hash-value>
File Management 236