Line - Dell C9000 Series Reference Manual

line

Enable and configure console and virtual terminal lines to the system. This command accesses LINE mode,
where you can set the access conditions for the designated line.
C9000 Series
Syntax
line {console 0 | vty number [end-number]}
Parameters
console 0
vty number
end-number
Defaults Not configured
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage Information You cannot delete a terminal connection.
Enter the keyword console 0 to configure the console port.
The console option for the S-Series is <0-0>.
Enter the keyword vty then a number from 0 to 9 to configure
a virtual terminal line for Telnet sessions. The system supports 10
Telnet sessions.
(OPTIONAL) Enter a number from 1 to 9 as the last virtual
terminal line to configure. You can configure multiple lines at
one time.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
Control and Monitoring 103