Dell C9000 Series Reference Manual page 106

Parameters
limit number-of-
sessions
clear-line enable
Defaults Not configured. You can use all the available sessions.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.8(0.0)
Usage Information You must have either the System Administrator or Security Administrator privileges to
configure login concurrent-session limit or to enable clear-line.
To limit the number of concurrent sessions that any user can have on console,
auxiliary, and virtual terminal lines, use the login concurrent-session limit
number-of-sessions command.
If the login concurrent-session clear-line enable command is configured,
you are provided with an option to clear any of your existing sessions after a successful
login authentication. When you reach the maximum concurrent session limit, you can
still log in by clearing any of your existing sessions.
Example
The following example shows how to limit the number of concurrent sessions that any
user can have to four:
Dell(conf)# login concurrent-session limit 4
Dell(conf)#
The following example shows how to use the login concurrent-session clear-
line enable command.
Dell(conf)# login concurrent-session clear-line enable
Dell(conf)#
Sets the number of concurrent sessions that any user can have
on console and virtual terminal lines. The range is from 1 to 12
(10 VTY lines, one console, and one AUX line).
Enables you to clear your existing sessions.
Description
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S4810, S4820, S5000, S6000, S6000-ON,
and Z9500.
Control and Monitoring 106