Mtu - Dell C9000 Series Reference Manual

pps
pps
pps
Error statistics:
00:04:36: %RPM0-P:CP %CHMGR-5-PEM_INSERTED: Power entry module 3
of unit 0 is inserted
pps
pps
00:04:36: %RPM0-P:CP %CHMGR-0-PS_UP: Power supply 3 in unit 0 is
up
pps
pps
pps
pps
pps
pps
refresh interval

mtu

Set the link maximum transmission unit (MTU) (frame size) for an Ethernet interface.
C9000 Series
Syntax
mtu value
To return to the default MTU value, use the no mtu command.
Parameters
value
Defaults 1554
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Over 511B packets:
Over 1023B packets:
Input underruns:
Input giants:
Input throttles:
Input CRC:
Input IP checksum:
Input overrun:
Output underruns:
Output throttles:
m - Change mode
l - Page up
T - Increase refresh interval
q - Quit
Enter a maximum frame size in bytes. The range is from 594 to
12000. The default is 1554.
0
0
0
0
0
0
0
0
0
0
0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
c - Clear screen
a - Page down
t - Decrease
Interfaces 950