Debug Isis Local-Updates - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms,refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)

debug isis local-updates

To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic
information.
C9000 Series
Syntax
debug isis local-updates [interface][vrf vrf-name]
To turn off debugging, use the no debug isis [vrf vrf—name] updates
[interface] command.
Parameters
interface
vrf vrf-name
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF. Introduced on the S6000-ON.
(OPTIONAL) Identifies the interface type slot/port as one of the
following:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to enable the debugging information on IS-IS
corresponding to that VRF. This information contains local
updates tied to the VRF that you specify. This command displays
the local LSP debugging details of the current unit.
Intermediate System to Intermediate System (IS-IS) 1051