Dell C9000 Series Reference Manual page 875

-p port-number
-v {1|2}
Defaults As indicated above.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.5(0.1)
9.1(0.0)
8.3.19.0
8.3.12.0
Related
ip ssh server
Commands
show ip ssh
client-pub-keys
Usage Information Both inbound and outbound SSH sessions using IPv4 or IPv6 addressing are supported.
Inbound SSH supports accessing the system through the management interface as well
as through a physical Layer 3 interface.
Example
If FIPS mode is not enabled:
Dell#ssh 10.11.8.12 ?
-c
only)
-l
-m
only)
(OPTIONAL) Enter the keyword —p then the port number.
The range is 1 to 65536
The default is 22
(OPTIONAL) Enter the keyword —v then the SSH version 1 or 2.
The default: The version from the protocol negotiation.
NOTE:
display in the output.
Description
Removed the support for hmac-sha2-256-96 algorithm.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Configure an SSH server.
Display the client-public keys.
NOTE: Some of the parameters in this command require licensing to access. For
more information, contact your Dell Networking representative.
If the FIPS mode is enabled, this option does not
Encryption cipher to use (for v2 clients
User name option
HMAC algorithm to use (for v2 clients
FIPS Cryptography 875