Distribute-List Redistributed-Override - Dell C9000 Series Reference Manual

distribute-list redistributed-override

Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
C9000 Series
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-override
in command.
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.8.1.0
6.3.1.0
Usage Information When you execute this command, IS-IS does not download the route to the routing
table if the same route was redistributed into IS-IS routing protocol on the same router.
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added IPv6 ISIS support.
Introduced.
Intermediate System to Intermediate System (IS-IS) 1062