Example
Dell(conf-if-po-1)# show config
!
interface Port-channel 1
Dell(conf-if-po-1)#
show interfaces port-channel
Display information on configured Port Channel groups.
C9000 Series
Syntax
show interfaces port-channel [channel-number] [brief]
Parameters
channel-number
brief
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
no ip address
shutdown
For a Port Channel interface, enter the keyword port-channel
then a number. The range is from 1 to 128.
(OPTIONAL) Enter the keyword brief to display only the port
channel number, the state of the port channel, and the number
of interfaces in the port channel.
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series. Modified to display the LAG failover
group status.
Introduced on the C-Series.
Interfaces
1025