Hash-Algorithm Hg-Seed - Dell C9000 Series Reference Manual

xor2
xor4
xor8
xor16
crc16cc
crc32MSB
crc32LSB
linecard slot-id
port-set port-pipe
Defaults crc16 algorithm
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.4

hash-algorithm hg-seed

Select the seed value used in HiGig hashing.
C9000 Series
Syntax
[no] hash-algorithm hg-seed number [linecard slot-id port-set
port-pipe]
Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-
BISYNC and lower 8 bits of xor2.
Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-
BISYNC and lower 8 bits of xor4.
Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-
BISYNC and lower 8 bits of xor8.
Use CR16 — 16-bit XOR.
Use CRC16_CCITT — 16-bit CRC16 using CRC16-CCITT
polynomial.
Use CRC32_UPPER — MSB 16 bits of computed CRC32.
Use CRC32_LOWER — LSB 16 bits of computed CRC32.
Enter the linecard slot ID and port-pipe number for the set of
ports for which you want to redistribute traffic flows. The range
of slot IDs is 0 to 11. The range of port-pipe numbers is 0.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Equal Cost Multi-Path (ECMP) 843