Show Interfaces Configured - Dell C9000 Series Reference Manual

show interfaces configured

Display any interface with a non-default configuration.
C9000 Series
Syntax
show interfaces configured
Command Modes
Command History
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.4.1.0
Dell#show interfaces configured | no-more
TenGigabitEthernet 6/0 is up, line protocol is down
Hardware is DellEth, address is 34:17:eb:00:20:93
Pluggable media present, SFP+ type is 10GBASE-SR
Interface index is 7340036
Interface mode is Cascade
Internet address is not set
Mode of IPv4 Address Assignment : NONE
DHCP Client-ID :3417eb002093
MTU 16364 bytes, IP MTU 16346 bytes
LineSpeed auto
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 04:24:38
Queueing strategy: fifo
Input Statistics:
byte pkts
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Changed the organization of the display output.
Current address is 34:17:eb:00:20:93
Medium is MultiRate, Wavelength is 850nm
SFP+ receive power reading is -2.0350dBm
20998409 packets, 16779063804 bytes
0 64-byte pkts, 806642 over 64-byte pkts, 1847316 over 127-
3696420 over 255-byte pkts, 7384764 over 511-byte pkts,
Interfaces 973