Defaults
none
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.7.1.0
7.6.1.0
7.4.1.0
clear lldp neighbors
Clear LLDP neighbor information for all interfaces or a specific interface.
C9000 Series
Syntax
clear lldp neighbors {interface}
Parameters
interface
•
For a Management Ethernet interface, enter the keyword
managementethernet then the slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
•
For a port extender Gigabit Ethernet interface, enter the
keyword peGigE then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the following keywords and slot/port or number
information:
•
For a 1–Gigabit Ethernet interface, enter the keyword
gigabitethernet then the slot/ port information.
Link Layer Discovery Protocol (LLDP)
1365