Import Peer-Config - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
Usage Information The Configuration Terminal Batch mode is used to setup common configurations on a
port extender connected in a dual-homing environment. Use the discard command
to cancel the uncommitted common configuration changes.
Example The following example shows the configurations being discarded:
Dell(conf-b)#interface vlan 2000
Dell(conf-b-if-vl-2000)#tagged peGigE 184/0/1
Dell(conf-b-if-vl-2000)#show config
interface vlan 2000
tagged peGigE 184/0/1
Dell(conf-b-if-vl-2000)#discard
Dell(conf-b)#show config
Dell(conf-b)#exit
Dell#

import peer-config

Use import peer-config to import the common configurations from the peer chassis.
C9000 Series
Syntax
import peer-config
Default None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
Usage Information Use the import peer-config to import the common configurations from the peer
chassis and apply them in the local system.
Description
Introduced on the C9010.
Description
Introduced on the C9010.
Port Extenders (PE) 1730