Show Ip Ospf Asbr - Dell C9000 Series Reference Manual

Line Beginning
with
"Supports only..."
"SPF schedule..."
"Convergence
Level"
"Min LSA...."
"Number of..."
Example
Dell#show ip ospf 10
Routing Process ospf 10 with ID 1.1.1.1 Virtual router default
Supports only single TOS (TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Convergence Level 0
Min LSA origination 0 msec, Min LSA arrival 1000 msec
Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
Number of area in this router is 1, normal 1 stub 0 nssa 0
Dell#
Related
show ip ospf database
Commands
show ip ospf interface
show ip ospf neighbor

show ip ospf asbr

Display all autonomous system boundary router (ASBR) routers visible to OSPF.
C9000 Series
Syntax
show ip ospf process-id | vrf vrf-name asbr
Parameters
process-id
vrf vrf-name
Defaults none
Description
Displays the number of Type of Service (TOS) rouse supported.
Displays the delay and hold time configured for this process ID.
Displays the intervals set for LSA transmission and acceptance.
Displays the number and type of areas configured for this
process ID.
Area BACKBONE (0)
Number of interface in this area is 1
SPF algorithm executed 205 times
Area ranges are
— displays information about the OSPF routes configured.
— displays the OSPF interfaces configured.
— displays the OSPF neighbors configured.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
Enter the keyword vrf and the name of the VRF to view all ASBR
routers visible to the OSPF process that is tied to a specific VRF.
Open Shortest Path First (OSPFv2 and OSPFv3) 1528