Private-Vlan Mode - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

private-vlan mode

Set PVLAN mode of the selected VLAN to community, isolated, or primary.

C9000 Series

[no] private-vlan mode {community | isolated | primary}

To remove the PVLAN configuration, use the no private-vlan mode {community

| isolated | primary} command syntax.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the C-Series and S-Series.

private-vlan mode

— sets the mode of the selected VLAN to community, isolated,

private-vlan mapping secondary-vlan

primary VLAN.

— displays the ARP table.

show interfaces private-vlan

show vlan private-vlan

switchport mode private-vlan

Enter the keyword community to set the VLAN as a community

Enter the keyword isolated to configure the VLAN as an

isolated VLAN.

— maps secondary VLANs to the selected

— displays the type and status of the PVLAN

— displays the PVLANs and/or interfaces that are part of a

— sets PVLAN mode of the selected port.

Private VLAN (PVLAN)

Table of Contents