Iscsi Priority-Bits; Iscsi Profile-Compellant - Dell C9000 Series Reference Manual

iscsi priority-bits

Configure the priority bitmap that advertises in the iSCSI application TLVs.
C9000 Series
Syntax
iscsi priority-bits
To remove the configured priority bitmap, use the no iscsi priority-bits
command.
Defaults 4 (0x10 in the bitmap)
Command Modes PROTOCOL LLDP (only on the global, not on the interface)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.6(0.0)

iscsi profile-compellant

Configure the auto-detection of Dell Compellent arrays on a port.
C9000 Series
Syntax
iscsi profile-compellent
Defaults Dell Compellent disk arrays are not detected.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Description
Introduced on the C9010.
Introduced on the Z9500.
iSCSI Optimization 1302