Dell C9000 Series Reference Manual page 992

linecard slot-id
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
Usage Information To view the switchport information for multiple ports of a specified slot, you can
specify any random port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port range
values separated with commas; for example, show interfaces
tengigabitethernet 10/0-1 switchport
The following describes the show interfaces switchport command for the
following example.
Items
Name
NOTE:
the feature extended bridge is enabled.
Enter the linecard slot-id parameters to specify the switch
ports on a line card. The range of slot IDs is from 0 to 11.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Added support for 4093 VLANs on E-Series ExaScale.
Introduced on the E-Series ExaScale.
Support added for hybrid port/native VLAN, introduced on the S
Series.
Introduced on the C-Series.
NOTE: The multiple port range value is supported only for the Gigabit Ethernet,
10-Gigabit Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port Channel, and
VLAN interfaces.
Description
Displays the interface's type, slot, and port number.
The peGigE interface option is only visible when
Interfaces 992