Router Bgp; Show Capture Bgp-Pdu Neighbor - Dell C9000 Series Reference Manual

router bgp

Enter ROUTER BGP mode to configure and enable BGP.
C9000 Series
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
process-id
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0

show capture bgp-pdu neighbor

Display BGP packet capture information for an IPv6 address.
C9000 Series
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address
Command Modes
Command History
Version
9.9(0.0)
Enter the number of the OSPFv3 process. The range is 1 to
65535.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Border Gateway Protocol 624