Common Ip Acl Commands; Clear Counters Ip Access-Group - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.2(1.0)
8.3.11.1
8.3.19.0
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell(config-ext-nacl)#show conf
!
ip access-list extended patches
Dell(config-ext-nacl)#

Common IP ACL Commands

The following commands are available within both IP ACL modes (Standard and Extended) and do not have
mode-specific options. When an ACL is created without a rule and then is applied to an interface, ACL
behavior reflects an implicit permit.
The C9000 supports both Ingress and Egress IP ACLs.
NOTE: Also refer to the

clear counters ip access-group

Erase all counters maintained for access lists.
C9000 Series
Syntax
clear counters ip access-group [access-list-name]
Parameters
access-list-name
Command Modes EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Commands Common to all ACL Types
(OPTIONAL) Enter the name of a configured access-list, up to
140 characters.
section.
Access Control Lists (ACL) 271