Dell C9000 Series Reference Manual page 75

Enter the CAM profile name then the amount for CAM space
allocation. The total space allocated must be equal to 12. The
IPv6 ACL range must be a factor of 2.
Enter l2acl and the FP block number for L2 ACL. The FP block
number range is from 1 to 8.
•
•
ipv4acl number
Enter ipv4acl and the FP block number for IPv4. The FP block
number range is from 0 to 8.
ipv6acl number
Enter ipv6acl and the FP block number for IPv6. The FP block
number range is from 0 to 4 (multiples of 2).
ipv4qos number
Enter ipv4qos and the FP block number for IPv4–QoS. The FP
block number range is from 0 to 8.
l2qos number
Enter l2qos and the FP block number for L2–QoS. The FP block
number range is from 1 to 8.
l2pt number
Enter l2pt and the FP block number for L2–Protocol tunneling.
The FP block number range is from 0 to 1.
ipmacacl number
Enter ipmacacl and the FP block number for IP-MAC ACL. The
FP block number range is from 0 to 6.
vman-qos
Enter vman-qos and the FP block number for Vman QoS. The
number
FP block number range is from 0 to 6.
ecfmacl number
Enter ecfmacl and the FP block number for ECFM ACL. The FP
block number range is from 0 to 5.
fcoeacl number
Enter fcoeacl and the FP block number for FCoE ACL. The FP
block number range is 0 to 6.
fedgovacl number
Enter fedgovacl and the FP block number for Fed Gov ACL.
The FP block number range is 0 to .
4: Creates 242 entries for use by the OpenFlow controller
(256 total entries minus the 14 entries reserved for internal
functionality)
8: Creates 498 entries for use by the OpenFlow controller
(512 total entries minus the 14 entries reserved for internal
functionality)
Control and Monitoring 75