Dot1X Reauthentication - Dell C9000 Series Reference Manual

dot1x reauthentication

Enable periodic reauthentication of the client.
C9000 Series
Syntax
dot1x reauthentication [interval seconds]
To disable periodic reauthentication, use the no dot1x reauthentication
command.
Parameters
interval seconds
Defaults 3600 seconds (1 hour)
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0
(Optional) Enter the keyword interval then the interval time,
in seconds, after which reauthentication is initiated. The range is
from 1 to 31536000 (one year). The default is 3600 (1 hour).
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
802.1X 255