Maximum-Paths - Dell C9000 Series Reference Manual

Version
8.3.19.0
8.3.10.0
Related show ipv6 prefix-list
Commands

maximum-paths

Configure the maximum number of parallel routes (multipath support) BGP supports.
C9000 Series
Syntax
maximum-paths {ebgp | ibgp} number
To return to the default values, use the no maximum-paths command.
Parameters
ebgp
ibgp
number
Defaults 1
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information If you enable this command, use the clear ip bgp command to recompute the best
path.
Description
Introduced on the S4820T.
Introduced on the S4810.
— View the selected IPv6 prefix-list.
Enter the keyword ebgp to enable multipath support for External
BGP routes.
Enter the keyword ibgp to enable multipath support for Internal
BGP routes
Enter a number as the maximum number of parallel paths. The
range is 1 to 16. The default is 1.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol 596