Clear Hardware System-Flow - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.0
8.3.7.0
7.8.1.0
Related show hardware
Commands statistics of the designated component of the designated stack member.

clear hardware system-flow

Clear system-flow statistics from a specified line card.
C9000 Series
Syntax
clear hardware system-flow {cp-switch | linecard slot-id | pe pe-
id stack-unit unit-number} [port-set port-pipe counters]
Parameters
linecard slot-id
pe pe-id
stack-unit unit-
number
port-set port-pipe
counters
Defaults none
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— displays the data plane or management plane input and output
Enter the linecard slot-id parameters to identify the line
card on which you want to clear system-flow statistics. The
range of slot IDs is from 0 to 11.
Enter the pe pe-id parameters to specify the port extender ID
for which you want to clear system-flow statistics.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
Enter the stack—unit unit—number parameters to specify the
stack-unit for which you want to clear system-flow statistics.
Enter the keywords port-set along with a port-pipe number,
then the keyword counters to clear the system-flow counters
on the selected port-pipe. The range of port-pipe numbers is: 0
to 2 on line card 0 and 0 to 3 on line cards 1 and 2.
Debugging and Diagnostics 767