Show Ip Bgp - Dell C9000 Series Reference Manual

neighbor 123.34.55.123 peer-group suzanne
neighbor 123.34.55.123 shutdown
Dell(conf-router_bgp)#
Related capture bgp-pdu max-buffer-size
Commands

show ip bgp

View the current BGP IPv4 routing table for the system.
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] [network [network-mask]
[longer-prefixes]]
Parameters
vrf vrf-name
ipv4 unicast
network
network-mask
longer-prefixes
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
(OPTIONAL) Enter the keyword vrf and then the name of the
VRF to view ipv4–unicast route information corresponding to
that VRF.
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
(OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
(OPTIONAL) Enter the network mask (in slash prefix format) of
the BGP network address.
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048–ON and S4048–ON.
Introduced on the S6000–ON.
Added support for VRF.
— specifies a size for the capture buffer.
Border Gateway Protocol 504