Dell C9000 Series Reference Manual page 510

Version
7.7.1.0
Usage Information To view the total number of COMMUNITY attributes found, use the show ip bgp
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP routes
with at least one BGP community attribute and the output is the same as for the show
ip bgp command output.
The following describes the show ip bgp community command shown in the
following example.
Field
Network
Next Hop
Metric
LocPrf
Weight
Path
Example
Dell#show ip bgp community ?
local-AS
known community)
no-advertise
community)
no-export
community)
aa:nn
|
Dell#show ip bgp community
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r
- redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
Weight Path
*>
0 200 i
*>
0 200 i
Dell#show ip bgp community no-advertise
Description
Introduced on the C-Series.
Description
Displays the destination network prefix of each BGP route.
Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing table.
Displays the BGP route's metric, if assigned.
Displays the BGP LOCAL_PREF attribute for the route.
Displays the route's weight.
Lists all the ASs the route passed through to reach the
destination network.
n - network,
Network
55.0.0.0/24
66.0.0.0/24
Do not export outside local AS (well-
Do not advertise to any peer (well-known
Do not export to next AS (well-known
Community number in aa:nn format
Pipe through a command
D - denied, S - stale
Next Hop
172.16.0.2
172.16.0.2
Metric LocPrf
Border Gateway Protocol 510