Dell C9000 Series Reference Manual page 996

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information The following describes the show interfaces transceiver command shown in

the following example.

Temp High Alarm

Voltage High

Alarm threshold

Bias High Alarm

TX Power High

Alarm threshold

RX Power High

Alarm threshold

EXEC Privilege

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the E-Series ExaScale.

Output augmented with diagnostic data for pluggable media.

Removed three fields in the output: Vendor Name, Vendor OUI,

and Vendor PN.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.

Output depends on the vendor, typically either "Average" or

"OMA" (Receiver optical modulation amplitude).

Factory-defined setting, typically in Centigrade. Value differs

between SFPs and SFP+.

Displays the interface index number that SNMP uses to identify

the interface.

Factory-defined setting. Value can differ between SFP and SFP+.

Chapters

Table of Contents