Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
224.0.0.5
default-information originate
To generate a default external route into an OSPF routing domain, configure the system.
C9000 Series
Syntax
default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always
metric metric-
value
metric-type type-
value
route-map map-
name
Defaults
Disabled.
Command Modes
ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 1/3 dst:
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
(OPTIONAL) Enter the keyword always to specify that default
route information must always be advertised.
(OPTIONAL) Enter the keyword metric then a number to
configure a metric value for the route. The range is from 1 to
16777214.
(OPTIONAL) Enter the keywords metric-type then an OSPF
link state type of 1 or 2 for default routes. The values are:
•
1 = Type 1 external route
•
2 = Type 2 external route
(OPTIONAL) Enter the keywords route-map then the name of
an established route map.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Open Shortest Path First (OSPFv2 and OSPFv3)
1492