Match Mac Dot1P - Dell C9000 Series Reference Manual

Parameters
mac-acl-name
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
7.4.1.0
Usage Information To access this command, enter the class-map command. After the class map is
identified, you can configure the match criteria.
Related class-map
Commands

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.
C9000 Series
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list
Defaults none
Command Modes CLASS-MAP
Enter a MAC ACL name. Its contents is used as the match criteria
in the class map.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced.
— identifies the class map.
Enter a dot1p value. The range is from 0 to 7.
Quality of Service (QoS) 1810