Summary-Address - Dell C9000 Series Reference Manual

Version
9.4(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
Usage Information To isolate problems with inter-area and external routes, use this command. In OSPF
inter-area and external routes are calculated by adding LSA cost to the cost of reaching
the router. If an inter-area or external route is not of correct cost, the display can
determine if the path to the originating router is correct or not.
Example
Dell#show ip ospf 1 topology
Router ID
3.3.3.3
1.1.1.1
Dell#

summary-address

To advertise one external route, set the OSPF ASBR.
C9000 Series
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value]
To disable summary address, use the no summary-address ip-address mask
command.
Parameters
ip-address
mask
not-advertise
Description
Added support for VRF on all platforms (Except MXL and
STOMP).
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Flags Cost Nexthop
E/B/-/ 1 20.0.0.3
E/-/-/ 1 10.0.0.1
Specify the IP address in dotted decimal format of the address to
summarize.
Specify the mask in dotted decimal format of the address to
summarize.
(OPTIONAL) Enter the keywords not-advertise to suppress
that match the network prefix/mask pair.
Open Shortest Path First (OSPFv2 and OSPFv3)
Interface Area
Te 13/1 0
Te 7/1 1
1562