Ip Route - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

show ip interface

ip route

Assign a static route to the switch.

C9000 Series

ip route {destination mask {ip-address | interface [slot/port] |

[tunnel tunnel-id] [distance] | [permanent] | tag tag-value}}[vrf

To delete a specific static route, use the no ip route destination mask

To delete all routes matching a certain route, use the no ip route destination

mask command.

interface interface

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— displays the interface routing status and configuration.

Enter the IP address in dotted decimal format of the destination

Enter the mask in the slash prefix format (/x) of the destination IP

Enter the IP address of the forwarding router in dotted decimal

Enter one of the following keywords and slot/port or number

information:

For a null interface, enter the keyword null then the slot/

port information. The Null interface number is 0.

For a Management Ethernet interface, enter the keyword

managementethernet then the slot/port information.

For a Loopback interface, enter the keyword loopback

then the slot/port information. The range is from 0 to

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

IPv4 Routing

Table of Contents