Default-Information Originate - Dell C9000 Series Reference Manual

default-information originate

Generates a default route into an IS-IS routing domain and controls the distribution of default information.
C9000 Series
Syntax
default-information originate [always] [metric metric] [route-map
map-name]
To disable the generation of a default route into the specified IS-IS routing domain, use
the no default-information originate [always] [metric metric]
[route-map map-name] command.
Parameters
always
metric metric
route-map map-
name
Defaults Not configured.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.5.1.0
(OPTIONAL) Enter the keyword always to have the default
route always advertised.
(OPTIONAL) Enter the keyword metric then a number to assign
to the route. The range is from 0 to 16777215.
(OPTIONAL) A default route the routing process generates if the
route map is satisfied.
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added IPv6 ISIS support.
Intermediate System to Intermediate System (IS-IS) 1056