Isis Hello Padding - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
Usage Information The holdtime (the product of the hello-multiplier multiplied by the hello-interval)
determines how long a neighbor waits for a hello packet before declaring the neighbor
is down so routes can be recalculated.
Related isis hello-interval
Commands

isis hello padding

Turn ON or OFF padding of hello PDUs from INTERFACE mode.
C9000 Series
Syntax
isis hello padding
To return to the default, use the no isis hello padding command.
Defaults Padding of hello PDUs is enabled (ON).
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
— specifies the length of time between hello packets.
Description
Introduced on the C9010.
Intermediate System to Intermediate System (IS-IS) 1079