Show Iscsi - Dell C9000 Series Reference Manual

When you use the no iscsi target port command and the TCP port you want to
delete is one bound to a specific IP address, the IP address value must be included in
the command.

show iscsi

Display the currently configured iSCSI settings.
C9000 Series
Syntax
show iscsi
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.6(0.0)
Example
Dell#show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Related
Commands
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
• show iscsi session— displays information about active iSCSI sessions on the
switch.
• show iscsi session detailed— displays detailed information about active iSCSI
sessions on the switch.
• show run iscsi— shows run iscsi.
iSCSI Optimization 1304